HRMW-460 T5

 

HRMW-460 T5

460 kVA Generator set Rental

Powered by: MTU
Alternator: STAMFORD

 

Three phase | 50 Hz | Diesel | Stage 3A

 

 

  • Engine Specifications 1.500 r.p.m.
  • Rated Output: 392kW prp ; 433kW standby
  • Manufacturer: MTU
  • Model: 10V1600G10F
  • Engine Type: 4-stroke diesel
  • Injection Type: Direct
  • Aspiration Type: Turbocharged and after-cooled
  • Number of cylinders and arrangement: 10V
  • Bore and Stroke: 122 x 150 mm
  • Displacement: 17,5 L
  • Cooling System: Coolant
  • Lube Oil Specifications: S10 W40
  • Compression Ratio: 17,5
  • Fuel Consumption ESP: 108,87 l/h
  • Fuel Consumption 100% PRP: 101,75 l/h
  • Fuel Consumption 75 % PRP: 80,22 l/h
  • Fuel Consumption 50 % PRP: 55,37 l/h
  • Fuel Consumption 25 % PRP: 29,11 l/h
  • Lube oil consumption with full load: 0,5 % of fuel consumption
  • Total oil capacity including tubes, filters 60,5 L
  • Total coolant capacity: 94 L
  • Governor Type Electrical
  • Air Filter Type Dry
  • Inner diameter exhaust pipe: 106 mm
  • Diesel engine
  • 4-stroke cycle
  • 24V electrical system
  • Water separator filter (visible level)
  • Dry air filter
  • Radiator with pusher fan
  • HTW sender
  • LOP sender
  • Radiator water level sensor
  • Electronic governor
  • Hot parts protection
  • Moving parts protection
  • Self-excited and self-regulated
  • IP23 protection
  • H class insulation
  • M5 control panel with electronic CEM7 control unit and switched emergency stop
  • Power panel with built-in circuit breaker plates
  • Safety relay in output terminal board (thermal magnetic trip and alarm in control unit)
  • Battery Switch
  • Adjustable earth leakage protection (time & sensitivity) standard in M5 and AS5, with thermal magnetic protection
  • 4-pole thermal magnetic circuit breaker
  • Battery charger alternator with ground connection
  • Starter battery/ies installed (cables and bracket included)
  • Ground connection electrical installation with connection ready for ground spike (not supplied)
  • Steel chassis
  • Anti-leakage chassis, predisposed to retain liquids (retention tray)
  • High capacity fuel tank, with contention base and easy external filling
  • Manhole for fuel tank cleaning and drainage
  • Manhole for chassis cleaning
  • Oversized chassis to protect the bodywork
  • Slide carriage and brackets for transportation with forklift
  • Tilting cap in the exhaust
  • Manhole to fill the radiator
  • Pre-installation or niche to house the quick connection hydraulic fittings for fuel transfer
  • Anti-vibration shock absorbers
  • Chassis with integrated fuel tank
  • Fuel level gauge
  • Bodywork made from high quality steel plate
  • High mechanical strength
  • Low noise emissions level
  • Soundproofing provided by high-density volcanic rock wool
  • Epoxy polyester powder coating
  • Full access for maintenance (water, oil and filters, no need to remove the canopy)
  • Reinforced lifting hooks for crane hoisting
  • Steel residential silencer -35db(A) attenuation.
  • Oil sump extraction kit
  • External filling of the fuel tank with safety key
  • Emergency stop button (double emergency stop protection: Interior on the panel + Exterior on the bodywork)
  • Mechanized for power cable output
  • Door with window to visualize control panel, alarms and measurements
  • Pressure locks
  • IP Protection according to ISO 8528-13:2016
  • 3 way valve for external fuel supply (available in 1/2" and 3/8" fittings) (opcional)
  • Fuel transfer pump (opcional)
  • Generator
  • Poles: 4
  • Connection type (standard): Star-series
  • Mounting type: S-1 14"
  • Insulation: H class
  • Enclosure (according IEC-34-5): IP23
  • Exciter system: Self-excited, brushless
  • Voltage regulator: A.V.R. (Electronic)
  • Bracket type: Single bearing
  • Coupling system: Flexible disc
  • Coating type: Standard (Vacuum impregnation)
  • - Electrical system.
  • M5 control panel with electronic CEM7 control unit and switched emergency stop
  • Power panel with built-in circuit breaker plates
  • Safety relay in output terminal board (thermal magnetic trip and alarm in control unit)
  • Battery Switch
  • Adjustable earth leakage protection (time & sensitivity) standard in M5 and AS5, with thermal magnetic protection
  • 4-pole thermal magnetic circuit breaker
  • Battery charger alternator with ground connection
  • Starter battery/ies installed (cables and bracket included)
  • Ground connection electrical installation with connection ready for ground spike (not supplied)
  • - Soundproofed version.
  • Steel chassis
  • Anti-leakage chassis, predisposed to retain liquids (retention tray)
  • High capacity fuel tank, with contention base and easy external filling
  • Manhole for fuel tank cleaning and drainage
  • Manhole for chassis cleaning
  • Oversized chassis to protect the bodywork
  • Slide carriage and brackets for transportation with forklift
  • Tilting cap in the exhaust
  • Manhole to fill the radiator
  • Pre-installation or niche to house the quick connection hydraulic fittings for fuel transfer
  • Anti-vibration shock absorbers
  • Chassis with integrated fuel tank
  • Fuel level gauge
  • Bodywork made from high quality steel plate
  • High mechanical strength
  • Low noise emissions level
  • Soundproofing provided by high-density volcanic rock wool
  • Epoxy polyester powder coating
  • Full access for maintenance (water, oil and filters, no need to remove the canopy)
  • Reinforced lifting hooks for crane hoisting
  • Steel residential silencer -35db(A) attenuation.
  • Oil sump extraction kit
  • External filling of the fuel tank with safety key
  • Emergency stop button (double emergency stop protection: Interior on the panel + Exterior on the bodywork)
  • Mechanized for power cable output
  • Door with window to visualize control panel, alarms and measurements
  • Pressure locks
  • IP Protection according to ISO 8528-13:2016
  • 3 way valve for external fuel supply (available in 1/2" and 3/8" fittings) Optional
  • Fuel transfer pump Optional
  • - EXHAUST SYSTEM.
  • Maximum exhaust temperature: 500 ºC
  • Exhaust Gas Flow: 93,6 m3/min
  • Maximum allowed back pressure: 150 mbar
  • Exhaust Flange Size (external diameter): 160 mm
  • - NECESSARY AMOUNT OF AIR.
  • Intake air flow: 2052 m3/h
  • Cooling Air Flow: 10,9 m3/s
  • Alternator fan air flow: 1,035 m3/s
  • - STARTING SYSTEM.
  • Starting power: 8 kW
  • Starting power: 10,88 CV
  • Recommended battery: 75 x 2 Ah
  • Auxiliary Voltage: 24 Vdc
  • Starter current peak: 800 A
  • Nominal starter current: 250 A
  • - FUEL SYSTEM
  • Fuel Oil Specifications: Diesel
  • Fuel Tank: 2.090 L
  • - Dimensions.
  • Length: 4.602 mm
  • Height: 2.809 mm
  • Width: 1.850 mm
  • Maximum shipping volume: 23,91 m3
  • Weight with liquids in radiator and sump: 6.495 kg
  • Fuel tank capacity: 2.090 L
  • Autonomy: 26 Hours
  • Sound pressure level: 69 dB(A)@7m

Power


kVA

460
 
507
Prime power  (460 - 700)
Stand by  (507 - 772)

kW

368
 
405
Prime power  (368 - 560)
Stand by  (405 - 617)
 

Sound level

 dB
 Distance (m)

 
 

dimensions


 
dimensions
Long (A)
460,20
Width (B)
185
High (C)
280,90
 

Weight


 
Weight
Weight with liquid in radiator and carter

6.495
 

Fuel capacity


 
 
2.090